Construction

How to find a commercial architect for your Sydney project

If you are looking for a commercial architect in Sydney, there are several things which should be kept in mind. One of the most crucial decision which you would make is considering the right architect for the project. Whether you are thinking of getting a single story unit built or a sky scarper, the architect you choose would have a major impact on how the project turns out in the end.

Failure to choose the right architect could spell trouble, no matter how much you invest. You don’t want the building to start showing structural problems after the few initial years only. The architectural design is the base on which the whole project rests, problems in the design would mean problem throughout the project and after that as well. On the other hand a well-designed building is not only pleasing to the eyes but a source of constant satisfaction as well.

So how do you find the right architect in Sydney, make sure to keep the following things in mind:

  • Before the actual process of confirming an architect takes place, your company should set up a selection committee. The committee would be responsible for ensuring that the project starts in the right collaborative note. The number of people on the committee could brainstorm and choose the right candidate for the deigning process. The joint effort and team work ensures that there is little room for error or wrong decisions.
  • The next step is to decide whether it’s a pubic or a private project. If it’s a public project, it allows nay of the firms to place a bid. The documents are available at a certain cost for people who would request them.
  • For a private project the bids are open through invitation only. Plus the owner who already knows the concept of the design might have the name of a few architectural firms in mind. They may send team invitations and then choose the architectural firm with the winning bid.

 

Shortlisting a commercial architect in Sydney

Shot listing to three to four architects is often a good idea. This would make it easier to compare and contracts the advantages or risks associated with each of those firms. It’s a good idea to send out a request for qualification. This can really cut down the search. The Quinlan Group are commercial architects in Sydney, and you could send them a request containing all of the following information:

  • Who the firm represents and how long have they been working on commercial projects
  • Lit of their previous designs
  • The fee that the firm charges for a particular project
  • The schedule and the budget as well
  • A list of all their certifications and awards if there are any to their name

This is one of the documents which would help the committee select the right commercial architect in Sydney. Just make sure to review each and every proposal carefully. Also never choose a firm on the basis of the price only. There are several other factors to consider. All of the factors mentioned above are important markers of a great architectural firm.

 

 

 

 

Click Flooring- An Innovative Flooring Option

What is click flooring? Click flooring refers to an innovative wooden flooring option. It can be used to cover existing floors. It’s called click flooring because during the installation process the flooring locks together. This means it doesn’t need any kind of adhesives to be installed. A simple clicking mechanism binds the floor. It is pretty simple to install and is in fact considered one of the easiest floor installation process.

Click flooring is usually made from laminate or engineered wood. Laminate floors are designed from wooden boards or a combination of wood or other materials. Traditional wooden floors comprise of three layers of hard wood floor. While laminates don’t resemble a wooden floor, but a click flooring which is designed from engineered wood can easily mimic a wooden floor.

The benefits of click flooring

The following are a few benefits of click flooring:

  • The major benefit is that click flooring is quick and easy to install. It can be installed on an already existing floor. Just keep in mind that the existing floor is smooth and doesn’t have any rough edges.
  • There is absolutely no need of adhesives of any sort. You won’t need glue or nail or anything which would bind the flooring. It makes use of a simple lock mechanism in which the pieces interlock with ease.
  • It is available in a variety of engineered wood options. The design and pattern of the grain differs too so you can choose something which appeals to you and compliments the décor of your home.
  • It can be found in different plank sizes. You have the option of choosing thick and thin boards to devise a set pattern for your floors.
  • You also have an option of choosing the kind of finishing which appeals to you. You can go for brushed, lacquered or an oiled finish.
  • It is pretty easy to maintain. Once its installed you don’t have to worry about its maintenance and care.

How to care for click flooring?

  • Engineered wooden floors cope better with moisture when compared to usual hard wood floors, still it shouldn’t be left soaking wet at any time. Make sure to use limited amount of water to clean the floor.
  • Place furniture pads under the furniture to prevent scratching.
  • Make sure that the floor is dusted and swept. While it’s not necessary to do every day, it should be done at least twice a week.
  • In case of laminate flooring, you don’t have to worry about moisture a great deal. Any spills can be easily wiped off and laminate is also less prone to staining. A simple weeping on alternate days would do the trick.
  • However, spills and stains should be handled immediately in case of click flooring because if left for a longer amount of time might cause permanent staining.
  • In case of lacquered floors, a lacquer soap should be used to clean the floors.

Engineered wooden and laminate floors when cared for properly can survive the test of time nd keep looking as good as new.

 

Builders Brisbane- Tips for building a house

Building a dream home can be exciting but stressful as well. It’s a great opportunity to build your home from scratch. The main reason why people chose building a home instead of buying one is that it allow them to customize their home according to their requirements. However, despite being rewarding, building a home is a time consuming process. One which entails a great deal of thought and labor. The following tips would help ensure that you get to build the home of your dreams with as less stress as possible.

Make sure you have a plan

Planning is the most important aspect of building a home. The details of your home should be meticulously jotted down on paper. If possible your builder might already have a plan ready, one in which you can make a few amends. However, if you are planning to start with a completely new design, make sure you start early.

There are certain sites which allow you to think up of a floor plan. If you could afford it, you can even have an architect draw up the plans for your home.

Keep track of all the customization and idea which come to your mind to make sure you don’t lose focus during the process.

Keep your budget flexible

It doesn’t matter how much you try to save, while building a house things do tend to go over budget. So make sure you have some extra cash handy besides what you actually aim to spend. Finishing costs which include electricity and gas installations could automatically make the budget climb higher than expected. Also these costs are not usually taken into account when the initial contract for the builder is signed.

Choose the right builders in Brisbane

This is a major decision which would have an impact of how your finished home looks like. You should hire a builder who has good credentials and has the right experience in developing the kind of house you are looking for.

Read the contract carefully

Once you have found a builder, its time to sign a contract. Go through the contract to see whether you understand all there is to building your new home. You should see what does construction cover and what it doesn’t. This can help prevent any unwanted surprises later on.

If you can afford it, have a lawyer look over the contract before you agree to sign it. Any variation in the contract should be mutually agreed upon.

Communicate often

Make sure you communicate with your builder throughout the building process. You should be kept updated regarding the status of your house. Whether it’s in the starting phase or the end phase. Any changes which are made in the original plan, due to any reason should be informed.

While building a home can be quite expensive you can still save up cash by shopping around for the most competitive prices.

Keep all the above mentioned things in mind when you hire a leading home builder in Brisbane.